UTP CAT5e Cable (Cat 5 enhanced), also know as Cat5e, is currently the most commonly used Ethernet cable in new installations. It’s designed to greatly reduce crosstalk, which means the UTP CAT5e is better at keeping signals on different circuits or channels from interfering with each other. A step above Cat 5, it can handle 1000 Mbps speeds (gigabit Ethernet) at 100 MHz wit a maximum cable length of 328 feet (100 meters). How to choose right Category 5e Cable for your network? This article may give you the answer.
Straight-Through or Crossover Category 5e Cable?
RJ-45 conductor UTP CAT5e cable contains 4 pairs of wires each consists of a solid colored wire and a strip of the same color. There are two wiring standards for RJ-45 wiring: T-568A and T-568B. The two wiring standards are used to create a cross-over cable (T-568A on one end, and T-568B on the other end), or a straight-through cable (T-568B or T-568A on both ends). To create a straight-through Cat 5e, you’ll have to use either T- 568A or T-568B on both ends of the cable. To create a cross-over UTP CAT5e cable, you’ll wire T-568A on one end and T- 568B on the other end of the cable.
The straight-through UTP CAT5e cables are used when connecting Data Terminating Equipment (DTE) to Data Communications Equipment (DCE), such as computers and routers to modems (gateways) or hubs (Ethernet Switches). The crossover UTP CAT5e cables are used when connecting DTE to DTE, or DCE to DCE equipment, such as computer to computer, computer to router or gateway to hub connections. The DTE equipment terminates the signal, while DCE equipment do not.
This article comes from cables-solutions edit released
