News

Pros Of Security Alarm Cables

Leave a comment

Fire alarm systems are very important for any business, school, facility, home and much more. They protect us when alerts arise and deliver notification of potential threat and harm. Security alarm cables are an integral part of any fire alarm system. They are used to connect security systems such as smoke detectors, emergency lighting, exit signboards, and fire command centres in high-rise buildings, business complexes, schools, educational institutions, hospitals, and other locations. These security alarm cables are utilised in situations when fire safety is critical. Security alarm cables can ensure maximum safety and security as they are engineered as lifelines to safety systems and securing buildings.

One of the most prudent precautions you can take to control your fire risk is to install a fire alarm. The most important reason to instal a fire alarm is to keep your employees, customers, and tenants safe. Simply, Fire alarms save lives. Fire alarms can reduce property loss. Fire alarms shorten recovery time, it may also qualify you for insurance discounts.

Utmost care must be taken in choosing the security alarm cables. We provide a wide range of cables such as security alarm cables, fire resistant cables, power limited fire protective cables and mineral insulated cables.

The security alarm cables are specifically suitable for working in very high temperatures. These security alarm cables are constructed with FR-PVC or PL-PVC insulation and outer jacket with aluminum and PE tape shielding that meets UL 1666 specifications.

News

Does fire alarm cable have to be in conduit?

Leave a comment

Home Fire Detection System Design To be in conduit or not is the question! When installing a fire alarm system according to NFPA and NEC 90 articles, any fire alarm cable below 7 feet or in non-accessible areas must be installed in a metallic raceway.

When two hot wires touch this is called a fault?

Bare wires can inevitably touch the wrong places: Hot wire to neutral wire means a short circuit that causes sparks to fly; hot wire to grounding wire, or to grounded metal box means ground fault and possible shock.

How many types of fire alarm cables are there?

Fire alarm cables are placed into three broad categories: plenum, non-plenum, and riser. Each of these corresponds to another standardized category, and these terms reflect where the fire alarm cable can be installed safely. Plenum cable, to be used in ducts or other enclosed air spaces, is called FPLP.

Can you use 12 2 wire smoke alarm?

Either a 15-amp circuit (wired with 14-gauge wire) or a 20-amp circuit (wired with 12-gauge cable) is acceptable for powering hardwired smoke detectors. Then, a 2-wire cable is run from the power source to the first smoke detector.

News

The Future of RG6+CAT5e Cable

Leave a comment

What does the future for RG6+CAT5e cable hold? Well it has been around more almost 20 years now and it’s still prevalent today. There are many homes that have this RG6+CAT5e cable still installed in their home. You can say that it’s performance still has a place among the many different categories.

At 100Mbps this gives many people just enough power to run a lot of their devices. For the most basic of usage this is ok but with the advancement in technology and capabilities has come a need for more.

With the introduction of 1000Base-T you can push your RG6+CAT5e cable more when using all four pairs for gigabit. While we always recommend to go with the cable that is most reasonable for your situation it might be time to look at the newer generation of category cables.

News

What to Know About Alarm Shield Cable

Leave a comment

While it is a alarm shield cable, it has a wide range of applications, including smoke alarms, smoke detectors, voice communications, microprocessor-controlled systems, pull boxes (fire alarm signals), burglar alarms, and other low voltage applications.

When it comes to fire alarm systems in particular, fire alarm circuits control and power applications such as safety functions, elevator capture and shutdown, damper control, and door release.

According to NEC Articles 760 and 725, there are two types of fire alarm system circuits: power restricted and non-power limited.

Power Limited Fire Alarm Wires typically work at 24 volts DC, whereas non-power limited alarm shield cables run at 120 volts AC. Non-power limited alarm shield cables are typically obsolete since low-voltage alarm shield cable offers greater benefits.

News

SFTP CAT6 STRANDED WIRE ETHERNET CABLE

Leave a comment

SFTP CAT6 stranded wire Ethernet cable is specifically created for mobile applications. Its extremely flexible yet robust jacket guarantees reliable performance in critical conditions.

The SFTP CAT6 stranded wire Ethernet cable uses superior shielding to block outside interference from disrupting signals transmitted across the wires allowing for maximum protection and faster transmission.

News

FTP Cat5e vs Cat5 : What’s the Difference & Comparison of the two Network Cables

Leave a comment

ategory 5 (Cat5) cables have been already running for a while. You’ll likely see them in most existing installations. But these cables are already getting short in terms of bandwidth capacity.

They cannot support the speeds that new networks demand. The cabling industry improved this cable and created the FTP Cat5e, which is an enhanced version of the Cat5.

So what is the difference between FTP Cat5 and FTP Cat5e network cable?

In a nutshell:

FTP Cat5e twisted pair cable is newer and supports faster data transmission rates than Cat5.
It achieves this by reducing the interference between cables making FTP Cat5e the preferred cable of the network industry.

With it, you can connect your computer, networking equipment, and VoIP devices to a high-speed network.

For more details on the difference, keep reading.

The FTP Cat5 and FTP Cat5e

Category 5 cables are the fifth generation of twisted paired Ethernet cables. The “5” represents newer and better cable manufacturing specifications, as compared with older generations. As a generalization, the higher the number here, the faster the transmission rate. The Category 5 specification was defined by ANSI/TIA/EIA-568-A.

This article comes from pcwdld edit released

News

GYTC8A Single Mode Optical Cable

Leave a comment

GYTC8A cable, singlemode/multimode fibers are positioned in the loose tubes, while the loose tubestrand together around metallic central strength member into a compact and circular GYTC8A cable core,and the water blocking materials are distributed into interstices of it.

After a PSP/APL is applied around the GYTC8A cable core, this part of GYTC8A cable accompanied with the stranded wires as the supporting part are completed with a PE sheath to be a figure-8 structure.

Application:

Apply for outdoor layout ways of overhead.

Long distance and local area network communication.

News

What is the difference between RG59 and RG6 cable?

Leave a comment

Deciding Between RG 6 and RG 59 for your Installation

You may be asking a ton of questions right now regarding what type of Coaxial Cable you should be purchasing. Should you get RG-59 or RG-6? Do you need Quad shielding? What about braiding? Do you need to get Plenum Rated cable? Or Direct Burial? There is a seemingly endless list of options and picking the wrong type of coax could result in spending a lot more money than what you were planning. In this comprehensive article we’ll go through a few basics of coaxial cable so you should know what you need.

RG6 cable is heavier gauge and has insulation and shielding tuned for high-bandwidth, high-frequency applications such as Internet, Cable TV, and Satellite TV signals. If you aren’t sure which cable to get, then RG6 cable is your best bet.

RG59 cable is thinner and is recommended in low bandwidth and lower frequency applications such as analog video and CCTV installations.

This article comes from sewelldirect edit released

News

KX6+2P Cable for CCTV Camera

Leave a comment

KX6+2P cable allows installers to run both the video and power to security cameras (analog CCTV, 720p and 1080p HD cameras) using a single KX6+2P cable run.

KX6+2P cable comes in 500 and 1000 foot spools and is available in black or white colors.

The KX6+2P cable that CCTV Camera Pros supplies has a solid copper core and 95% copper braided shielding.

This is the right type of coax cable to use for CCTV and HD CCTV installations.

This article comes from hzspring edit released

News

What is KX8 cable and how is it used?

Leave a comment

KX8 cable is commonly used by cable operators, telephone companies, and internet providers around the world to convey data, video, and voice communications to customers. It has also been used extensively within homes.

The KX8 cable has been around for a long time as a technology (since the early 20th century) and has many singular advantages for reliable, accurate transmission.

It also has limitations that will cause it to be replaced in some cases by fiber optic KX8 cable, category cable or, sometimes, by wireless signals.

The key to the KX8 cable’s success has been its shielded design, which allows the KX8 cable’s copper core to transmit data quickly, without succumbing to interference or damage from environment factors.

This article comes from ppc-online edit released