News

KX8 Cable For Electronic Devices

Leave a comment

High performance microwave KX8 cable assemblies and coaxial components supporting critical operations with application specific premium interconnects for high durability. Embedded with RF Florida Lab technology, our KX8 cables are available with customised option packages and are especially well-suited for precision testing applications and harsh environments in aircraft, marine, space and ground applications.

The KX8 cable products are designed to be low loss, high frequency cables that have minimal phase change over temperature and flexure. The phase response near room temperature is virtually flat and KX8 cables tested through a much wider temperature range experience only 600ppm delta from -40° C to +85° C. Phase over flexure response is extremely stable as well making this product an ideal choice for any application requiring consistency in the signal timing.

News

What Is an RG6 Cable Used For?

Leave a comment

An RG6 cable is one of the most commonly used cables for home and commercial purposes. It is a form of coaxial cable used to transmit audio and video signals to devices such as television sets.

History

Initially the RG6 cable design was created and used by the military. The RG stood for “radio guide.” According to tech website Tech-FAQ, it is no longer used in military radio transmission equipment, and thus the term radio guide is seldom used.

Function

An RG6 cable is used to connect devices that carry audio and video signal from a transmitter to a display. This includes connecting aerial antennas, satellite dishes and cable television.

Features

This type of coaxial cable is completely covered with a polyethylene layer on the outside. Underneath this layer is a shield layer that protects against radio frequency interference. It also features a locking nut on each end of the cable, which allows the cable to be secured to a jack such as the one found on a TV.

Benefits

One key benefit of the RG6 line, and a reason for its popularity, is that it often replaces RG-59 cables, an earlier form of coaxial video/audio cable. According to Tech-FAQ, this older technology was prone to signal leakage and interference.

Another benefit of the RG-6 cable is that it can be used in many applications due to its durability against interference and the environment. It can be run underground as well as run up the sides of buildings to connect to antennas and satellite dishes.

Considerations

Dual-shield RG6 cable costs less than quad-shield variety, but the quad-shield may offer better protection against interference. Also, if you buy it in bulk, you may need to purchase end crimps that attach to each end of the cable and feature the locking nut used to connect the cable to various devices.

News

SFTP CAT7 Snagless Shielded (SFTP) Ethernet Network Patch Cable

Leave a comment

This Snagless Shielded SFTP Cat7 Ethernet cable provides an ideal solution to connect with 10GBase-T ports in crowded telecom rooms, data centers, and other high-density 10G networking applications.

The SFTP Cat7 Ethernet cable supports 10 Gigabit Ethernet at longer distances up to 100 meters and protects a high-speed network connection from noise and electromagnetic interference. OPTCORE SFTP Cat7 cable is tested to 600Mhz, meaning better performance over Cat6 & Cat6A network cables.

Constructed from high-quality SFTP Cat7 bulk cable and RJ-45 plugs, this design minimizes Near-End Crosstalk (NEXT) levels. Available in a variety of lengths and colors, Optcore’s line of SFTP Cat7 cable gives you the flexibility to build your Individual length cable however you want.

News

Indoor Ftth Cable To Individual Homes

Leave a comment

Indoor Ftth Cable To The Home, is the delivery of a communications signal over optical fiber from the operator’s switching equipment all the way to a home or business, replacing existing copper infrastructure such as telephone wire and coaxial cable. Indoor Ftth Cable is a relatively new and fast growing method of providing vastly high-speed broadband services integrating voice, data and video to consumers and businesses.

Indoor Ftth Cable is proved to deliver bundled or individual data, voice and video services to the home more efficiently-and securely-versus traditional copper transport mediums. We are all aware of slow dial-up frustrations, DSL outages, and coax cable issues (Broadband-Cable TV). Once fiber optics deployed- as an end to end solution- all these inherent problems associated with copper /coax based transport factilities virtually disappear.

News

High speed SFTP CAT7 Ethernet cable with the Features You Need

Leave a comment

Quality ethernet cable comes with a host of features and benefits designed to optimize your network performance, and are ideal for indoor, in-wall and ceiling installation. Their flexible, stranded design offers improved life for the cable and protects connected ports. This shielded, four-pair twisted LAN cable has PIMF pair screening, with the pairs in metal foil. The metal connectors are both shielded to guard against EMI and RFI interference, offering accurate, reliable data transfer.

These cables also have stranded conductors for greater flexibility. All Cat 7 Shielded patch cords are double shielded for increased signal isolation to prevent outside interference, and backward compatible with Cat5 and Cat 6 cables. SFTP Cat7 Ethernet Cable offers better performance than Cat5 and Cat 6 cables, and tighter specifications to eliminate noise and crosstalk.

This copper cable is rated for transmission frequencies up to 600 MHz, making it the perfect option for any network that relies on high-speed indoor networking applications. Users report reliable support for Gigabit connections, with potential data speeds as high as 10gb. That means that your network will flawlessly accommodate all your streaming, download, upload, cloud collaboration, and server application needs at speeds that are sure to make you smile.

Copper offers greater malleability and flexibility when compared to CCA cables. That makes copper cables easier to work with, and less likely to break when flexed during installation. Copper also offers less dc resistance than CCA (about 55% less), which means less cable heating and reduced risk of power dampening for any PoE device.

Your network should have ethernet cables that can keep pace with your connected life. SFTP CAT7 Patch Cord Gold Plated Shielded Network Ethernet LAN Cable is the ideal network cable solution to ensure that your network has the data speed capacity you need to enjoy fast, reliable connections for all your devices.

News

Fire Alarm Cable Ratings

Leave a comment

One of the most essential factors to consider when purchasing a fire alarm cable is the fire rating. There are three key fire safety ratings to consider: FPL, FPLR, and FPLP. While NEC Article 760 explains what a power-limited cable is. The fire alarm cable is tested and certified by UL, which specifies its applications and fire safety requirements.

FPL — FPL cable is ideal for general-purpose applications but should not be installed in air ducts, plenum spaces, riser closets, or any other place where environmental airflow occurs. These cables are fire resistant and have passed both the UL 1424 and the vertical flame test 1581.

FPLR — Riser-rated fire alarm wire is suited for vertical runs in elevator shafts as well as floor-to-floor paths. These cables feature fire-resistant properties, such as the capacity to self-extinguish and emit little harmful smoke. They keep the fire from spreading from floor to floor. Riser cables need to pass the UL 1424 and 1666 vertical riser tests.

FPLP – Plenum-rated fire alarm wire is intended for use in plenum spaces, air ducts, and other places with high ambient airflow. When burned, they self-extinguish and produce a minimal amount of hazardous chemicals and smoke. These cables are UL 1424 and Steiner tunnel test 910 compliant.

News

75 Ohm Flexible RG59 Cable

Leave a comment

RG59 cable is a precision broadcast video RG59 cable for low-bandwidth, low-frequency (below 50 MHz) applications, including analog video, RF and video surveillance.

With an impedance of 75 Ohms, the RG59 cable features a solid 20 AWG bare copper conductor, gas-injected foam HDPE insulation and Dufoil shielding with a tinned copper braid. It’s also offered in eight different colors for identification purposes.

News

The differences between RG6 and RG11 cables

Leave a comment

The differences between RG6 and RG11 cables

The differences between RG6 and RG11 cables
When choosing the right coaxial cable to wire-up an AV system, we frequently come across the RG6 and RG11 cables designations. RG Coaxial Cables are extensively utilized in Telecom projects as well as daily civil applications. RG Coaxial Cables include various types in which the most common model are RG6, RG11, and RG9 Coaxial Cables. How different are these three types? It will be explained below.

What are RG coaxial cables?

RG Coaxial cables are the kind of coaxial cables utilized for efficient transmission solutions for Telecom systems that include Satellite communication, Marine, Mobile communication, the AM, FM, Inbuilding, and Radar Communication systems, video, and more.

Are RG11 and RG6 different?

RG6 Coaxial Cables are applied for Baseband near signal transmission distance, frequently used as a cable branch to transmit observing camera data and connect Indoor Television Equipment.

RG11 Coaxial Cables are utilized for Wide Broadband with considerable signal transmission distance, generally used as the main cable line in transmitting observing camera data, Cable Television, etc.

RG59 Flexible Coaxial Cables: With the feature of intertwined multi – small fibers that make the fibers flexible; consequently, this is a variety of Coaxial Cables that is mainly utilized for observing cameras in elevators, generally used for the analog camera.

RG11 and RG6 Coaxial Cables have similar applications and functions, but they are not the same, and some differences have to be considered before picking one over the other.

News

How many different types of Fire Alarm Cable are available?

Leave a comment

There are five basic types of Fire Alarm Cable that are identifiable by the areas where they are approved for use by the National Electric Code.

FPL— Power Limited for general purposes. This designation indicates that this fire alarm cable is non-plenum rated, and may not be installed in risers, ducts, plenums, or other spaces used for environmental air unless first installed in conduit. Although FPL cables resist the spread of fire, they are not typically as fire-resistant as plenum and riser-rated cables.

FPLR— Power Limited Suitable for the floor to floor, or “riser-rated.” Risers are the spaces that run vertically from floor to floor in a building. The National Electric Code requires FPLR cable to be fire-resistant to prevent fires from spreading through multiple floors of a building.

FPLP— Power Limited Suitable for use in ducts, plenums, and other spaces dedicated to air circulation because of the extra safety features incorporated into its design. This Cable is plenum-rated, fire-resistant, and produces little smoke in the case of a fire.

NPLF— Non-Power Limited for general purpose.

NPLFP— Non-Power Limited Suitable for use in ducts, plenums, and other spaces.

News

A Guide to the Different Types of Coaxial Cables

Leave a comment

Coaxial cables are a type of transmission cable used to transmit radio frequency (RF) signals. They generally consist of four layers—the inner conductor layer, the inner conductor insulating layer, the conductive shield layer, and the insulating outer jacket layer. This shielded design enables signal carrying voltage to flow through the central conductor with minimal interference from outside electrical and/or magnetic fields.

There are many types of coaxial cables available—varying in design and size—to suit different applications. One of the key design elements by which coaxial cables can be categorized is connector type—i.e., the mechanism that connects the cable to other devices. Below, we highlight the several common types of coaxial cable, based on connector, as well as their typical applications.

BNC

Bayonet Neill-Concelman (BNC) coaxial cable connectors are one of the most commonly used connector types. They feature a twist and snap bayonet connection design that requires a quarter-turn to form a connection.

TNC

Threaded Neill-Concelman (TNC) connectors are a miniature threaded variation of BNC connectors. However, they are waterproof and more rugged.

SMA

Subminiature Version A (SMA) connectors are 50 Ω connectors. They are available in several formats, including male vs. female, straight-through vs. right-angled, and more.

7/16 DIN

7/16 DIN (Deutsches Institut für Normung) connectors have a threaded design. They are typically used for high-wattage transmissions.

QMA

QMA connectors are similar to SMA connectors. However, they have a snap-lock design that allows for faster and easier connection/disconnection and 360° rotational capabilities after connection that allows for better installation flexibility.

MCX

Micro coaxial (MCX) connectors are small form-factor connectors. They are designed for use in applications with size or space limitations.

RCA

Radio Corporation of America (RCA) connectors are also known as cinch connectors. They typically feature three color-coded jacks and plugs (Red, Yellow, and White).